Enameled wire is a key raw material for electric motors and electrical products. Especially in recent years, the rapid development trend of the electric power industry and the rapid development trend of electrical products have produced widespread use of enameled wire, and it is also clear to the enameled wire.

Indeed, higher regulations have been proposed. Enameled wires are manufactured in many electrical products, instruments and equipment. First, the cable sheath on the conductive cable should be stripped to facilitate the next step of solving the cable.

The traditional peeling technology includes mechanical equipment peeling, organic chemical peeling and hot stamping die peeling. As everyone knows, each method has related problems, such as the destruction of electrical conductors. The production and processing speed is relatively slow;

Let me learn about the many reasons that cause the wire breakage of the wire drawing machine.

1. The sizing area of the wire drawing die will increase due to normal damage in the continuous production and manufacturing of the wire drawing die.

2. The amount of current is unstable in production, and the amount of current is high and sometimes low, and the drawing wire is very easy to be torn off or melted by the sudden change of strong current in the whole process of quenching.

3. Because of the product quality problems of various rod materials. In the process of processing, the bar material has irregular quality defects, which causes the wire drawing to be torn off by various support forces that cannot be predicted and analyzed during the deformation of the metal wire drawing. This situation seldom occurs when the rod material is good.